Level Control Paddle Switch
eliable stainless steel inductive paddle switch monitors grain levels
This unique level control uses an inductive sensor to monitor grain in most grain bins including corrugated bin applications. Built of stainless steel, this switch is totally submersible.
For use on Dryer Bin or Open Top Grain Dryers
Mounting Plate Instructions
20-240 AC | DIMENSIONS (h,w,d) | PRICE |
KA-621 | 8 3/4, 4 1/2, 1 1/2 | $179 |
Monitor the grain level with inductive Paddle Switch when using Dryer Controls
A paddle switch is mounted at the top of the grain column. This reliable, easy to maintain switch is also used below the drying fan/heater as a full storage monitor of the cooling and storage compartment of the grain bin.
Automatic Dryer Controls
Provides continuous grain drying when used on automatic roof (top) dryer controls
Set your dryer controls for simultaneous filling and dumping of grain 24 hours a day. Temperature sensors are monitored to accurately control the dumping of grain at predetermined moisture settings.
- Controls all functions of automatic roof (top) dryers
- Weather-tight control panel with clear cover for easy viewing of operations
- Continuous grain temperature display
- Includes stainless steel temperature probes
All day to day functions are performed on the switches mounted on the exterior or the weather-tight control panel. There is no need to open the panel door once the dryer con- trols have been set. These features include:
- Fan and fan 2 start and stop switches
- Dryer control functions
- Burner on/off switch
Dryer control operations can be easily monitored through the clear cover on the control panel
The 4 line LCD visual display module informs the operator of all functions of the dryer including:
- time settings
- low grain, or full storage
- auger delay settings
- power out conditions
- fan heat errors
An LED temperature display continuously informs the operator of the grain temperature. Stainless steel temperature probes are available in sets of 2 or 4 sensors. A simple set point menu is standard on all units.